Bird Repeller for Roof
The Bird Repeller for Roof "Eolo" is a spinning visual bird deterrent used to prevent birds from landing on roofs, chimneys, air conditioners... It avoids unsightly messes and stains caused by bird feces.
Birds often use roofs, chimneys and air conditioners to perch, leaving their droppings on terraces, solar pannels, courtyards, clothes lines, etc. The Bird Repeller for Roof" Eolo" avoids these problems.
- The Bird Repeller for Roof "Eolo" uses wind power. No electricity needed!
- Spins continuously and prevents birds from landing on the protected area.
- The spinning motion keeps birds away.
- Easy to install:
- First of all, to achieve an optimal fixation of the Eolo Bird Repeller for Roof, please clean the surface where you are going to install it.
- You can install it either by screwing the base to the surface, or by gluing the base with silicone or industrial adhesive.
- If you are going to use silicone or industrial adhesive: it is advisable that the product dries well, before the arms of the Eolo Bird Repeller for Roof begin to rotate. For this, it is recommended:
- Remove the rotating arms from the base (using an allen key).
- Fix the base to the surface using silicone or industrial adhesive.
- Wait 24 hours for the silicon or industrial adhesive to be completely dry.
- Open the rotating arms and re-attach them to the base (with the allen key).
- Open the blue flags at the ends of the rotating arms, so that the Eolo Bird Repeller for Roof begins to spin.
- Eolo Bird Repeller for Roof isn't designed only for flat roofs; it's also suitable for sloped roofs with an inclination of up to 28%. If you have doubts about the slope of your roof, please don't hesitate to send us a photo. We'll examine it and confirm if the Eolo Bird Repeller for Roof is suitable for installation.
- The Eolo Bird Repeller for Roof covers areas up to 1,85 m in diameter.
- Effective for large pest birds including: gulls, cormorants, pigeons, crows, raptors...
- Manufactured in Spain.
Bird Repeller for Roof - Technical Specs
- Materials:
- Rotor body: Polyamide 6-6 -glass fibers -UV-8.
- Rudders: Polyamide 6 -6 -UV-8.
- Bars: Tube pultridode polyester fiberglass reinforced resin, resin vinistestery final treated bicomponent.
- Caps: Anodized aluminum.
- Body rotor mechanism: AISI 316 stainless steel, bronze.
- Rudders mechanism: Stainless steel AISI 316.
- Mast: Stainless steel AISI 304.
- Flanges: Galvanized steel.
- Dimensions:
- Height: 16cm.
- Length: 185cm.
- Temperature resistance: -50º up to 150º.
- Supports speeds of over 100 km/h.
